The R1 Merger Attachment is available for the John Deere W200-Series (W235/W260/W200M/W235M/W260M/W235R/W260R) Self Propelled Windrowers (SPW) with 500R/R500 Rotary Platforms.
The R1 allows merging of windrows with a John Deere self-propelled windrower in front of a self-propelled forage harvester, or in conditions that do not require wide swaths for dry-down. The R1 can eliminate the need for raking or merging passes through the field.
Product Highlights
- Merge two or three windrows into one.
- Two windrows to be picked up by a 3.0m pickup or larger
- Three windrows to be picked up by a 4.0m pickup or larger
- Single windrows can be created as selected by the operator.
- Control all merger functions using the keypads on the multi-function lever.
- Attachment can be disabled on-the-go for normal center-dumping of the windrow.
- Attachment raises to transport position with leading edge of the belt frame angled upward to clear incoming crop flow for center-dumping.
- Belt speed is controlled from the multi-function lever and is adjustable to vary windrow placement and formation.
- Attachment features a front conveyor behind the conditioner. This device gathers material dropping out of the crop stream and delivers it to the cross belt for reliable function in varying crop conditions.
- The hydraulic drive system enables the belt to maintain speed as the engine load is increased and engine speed decreases.
- Each belt features a v-groove for ease of belt tracking.
- Windrowers arrive from the factory Merger-Ready. No welding is required.
Ordering Information
-
- RC201035 Bundle, R1 Merger Attachment
- RC201133 Bundle, W200 (Up to MY21) Completion
- RC201198 Bundle, W200M and W235M (MY22+) Completion
- RC201158 Bundle, W235R and W260R (MY22+) Completion
- RC201285 Assembly, Shipping Pallet and Stands
See Marketing Bulletin for more information.
Reference Documents
